Shop
Showing 1–12 of 70 results
-
CTIA Hand Phantoms (Kits)
CTIA Hand Phantom Kits comprise of various combinations of IXB-030 SAM Phantoms IXB-05x R&L hand phantoms IXBH-06x and IXBH-09x Talkmode and Datamode fixtures IXF-CTIA-v3.x Fluid or Gels IXB-011A Full face masks Carry Cases etc Please contact Indexsar to discuss your requirement.Read moreView Product →
-
Dipole Calibration
IndexSAR manufactures a wide range of dipoles for validation of SAR testing systems according to international standards. SAR system validation dipoles are designed to have low return loss ONLY when presented at a proscribed distance, against a lossy liquid filled box phantom. Spacing distances are specified in the standards, for example ; 10mm from the liquid (for […]Read moreView Product →
-
Dosimetric SAR Probe
Miniature 1mm single channel SAR probe SAR probe for SAR research applications – eg. in Petri dishes 1.2mm external diameter Dipole angle designed for optimised isotropy when axially rotated Typical isotropy < ±1dBRead moreView Product →
-
Flat phantom, Freq 450-800MHz
Large (30 litre) flat phantom with 10mm perspex walls and FR4 base for testing between 450 and 800MHz. For L-shaped probes, use Upright Flat Phantom, 450-800MHz/Read moreView Product →
-
Flat phantom, Freq above 800MHz
Standard SARA-C flat phantom, for frequencies of 800MHz and above, for use with either straight or L-shaped probesRead moreView Product →
-
Fluid Measurement Service
IndexSAR can offer a measurement service to test tissue simulant fluids either of IndexSAR or third party manufacture. The measurements are traceable and results supplied with a comprehensive report.Read moreView Product →
-
HAC RF Probes
Air Field Probes Further applications such as Hearing Aid Compatibility (HAC) and OTA testing require air probes both for E and H field measurements, using the successful ‘in-liquid’ SAR probe design techniques, these new probes have been optimised for use in air as compared to SAR probes designed for use in lossy liquids. All IndexSAR […]Read moreView Product →
-
iOTA
IndexSAR, a CTIA listed phantom manufacturer, have collaborated with Emscan to provide a bench top phantom head + hands test fixture (IXBH-400). When combined with the Emscan RFX2 scanner the resultant iOTA System can be used for simulating an Over The Air (OTA) test to measure Total Radiated Power (TRP) in ‘talk mode’ (with phantom head/hand) , or […]Read moreView Product →
-
IXA-020 Standard Fast SAR probe amplifier
Standard Fast SAR probe amplifier IndexSAR’s fast amplifier all-rounder. By sampling baseband signals, instead of averaging, RF modulation schemes are automatically allowed for without the need for separate calibration factors for each. With a linear response from 0.01W/kg to over 100W/kg, it covers all the major standards with ease.Read moreView Product →
-
IXA-030 High Sensitivity Fast Probe Amplifier
High Sensitivity Fast Amp Sensitivity 10 times better than standard fast amp. Ideal for testing in the 5GHz band where signals decay over very short distances.Read moreView Product →
-
IXB-010 Bubble removal kit
For fluid filled SAM head phantoms the standards require that a minimum of air should be left in the head after filling. The IXB-010 bubble removal kit offers a simple and efficient way of ensuring a minimum of air is retained in the head.Read moreView Product →
-
IXB-030 CTIA SAM phantoms
Optionally supplied pre-filled with a choice of gel or fluid material Compliant with CAD dataset in CTIA OTA Test Plan v 3.x, IEC 62209, and IEEE1528 Permittivity & Conductivity tolerance +/-20% in frequency range 600MHz – 6GHz Working temperature 22° ± 1°, Storage +15° to +35° Long LifeRead moreView Product →